🔌 Key Features
Gigabit Data + Power: One 1000Base-T (Gigabit) RJ45 port that carries both data and PoE power.
PoE Output: 52 V DC at 0.6 A, delivering up to 31.2 W of power — suitable for devices requiring higher power than basic IEEE 802.3af PoE but not as high as 60 W PoE++.
Passive/PoE+ Support: Designed to work with devices that support higher-power PoE (PoE+) standards.
Wide Input Range: Accepts 100–240 V AC power at 50/60 Hz with a maximum input current of ~0.7 A.
Simplicity: Plug-and-play design — no configuration or setup needed.
Environmental Durability: Operates reliably across a wide temperature range from -10 °C to +45 °C.
Surge/Inrush Protection: Designed with protection against electrical surges and inrush current (~100 A at 230 V AC).
⚙️ Typical Specifications
| Specification | Details |
|---|
| Model | RG-POE-AT30 |
| Ethernet Port | 1 × 1000Base-T RJ45 |
| Output Voltage | 52 V DC ±5 % |
| Output Current | 0.60 A |
| Max. Power | ~31.2 W |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Input Current | Max. ~0.7 A |
| Inrush Current | ~100 A @ 230 V AC |
| Operating Temp. | -10 °C to +45 °C |
| Storage Temp. | -40 °C to +70 °C |
| Dimensions | ~95.2 × 52.2 × 33.2 mm |
| Weight | ~145 g |
| Installation | Plug-in injector (desktop/wall) |
| Protection | Surge/inrush protection |
| Warranty | Typically ~3 years (varies by region) |
🛠 What It’s Used For
This PoE injector is ideal when you need to power a singlePoE-enabled device from a non-PoE network connection:
✔ Wireless access points (APs)
✔ IP surveillance cameras
✔ VoIP telephones
✔ Other PoE-powered network devices
By sending both power and data over one cable, it reduces cabling complexity and makes installations cleaner, especially where AC outlets are not available near the device.
📍 Installation & Compatibility
